 |
1 Piece
Tianjin, China
500
L/C, T/T, D/P, Western Union, Paypal
Customized
API
Center Drill Bit
Tungsten Carbide
Well Drilling
New
| Quantity: | |
|---|---|
Introduction
Steel Body PDC Bit obtains better ROP in soft to medium hard formations and lower compressive strength.
Features
Durasef Gauge: Super strong material promotes gauge wear resistance to enhance long lifetime.
Hydraulics: The movement and cooling of cuttings can be optimized by the hydraulic design that matches the chip quantity and displacement of each blade.
Special Backrake Design: A Backrake can be added in the bit in order to prevent the bit from getting stuck when drilling.
Technology
Unique Blade Design: Importing exclusive cutting teeth and unique curved blade design improve the ability of drilling in hard interlayer.
Basical Specification | |
Size of bit | 14 3/4'' |
Number of Blades | 6 |
Primary Cutter Size | 16mm |
Nozzle Qty. | 7NZ |
Thread Connection | 7 5/8 REG PIN |
Operating Parameters | |
RPM (r/min) | 60~300 |
WOB(KN) | 20~190 |
Application | Medium-hard to hard formations with low compressive strength, such as hard shale, limestone, sand-stone, dolomite, hard gypsum, marble, etc. |
Introduction
Steel Body PDC Bit obtains better ROP in soft to medium hard formations and lower compressive strength.
Features
Durasef Gauge: Super strong material promotes gauge wear resistance to enhance long lifetime.
Hydraulics: The movement and cooling of cuttings can be optimized by the hydraulic design that matches the chip quantity and displacement of each blade.
Special Backrake Design: A Backrake can be added in the bit in order to prevent the bit from getting stuck when drilling.
Technology
Unique Blade Design: Importing exclusive cutting teeth and unique curved blade design improve the ability of drilling in hard interlayer.
Basical Specification | |
Size of bit | 14 3/4'' |
Number of Blades | 6 |
Primary Cutter Size | 16mm |
Nozzle Qty. | 7NZ |
Thread Connection | 7 5/8 REG PIN |
Operating Parameters | |
RPM (r/min) | 60~300 |
WOB(KN) | 20~190 |
Application | Medium-hard to hard formations with low compressive strength, such as hard shale, limestone, sand-stone, dolomite, hard gypsum, marble, etc. |
