 |
517
1
tianjin ,shanghai
well drilling
New
| Quantity: | |
|---|---|
Introduction
.
There are two sealing methods,sealed with O shape rubber rings or sealed with metal rings.The former adapts to conventional drill holes, the latter adapts to drill holes with high temperature and high speed.
Adopting friction balls to fasten cones, safe and reliable.
Buildup welding of wearing-resistant alloy at sliding surfaces of the head bearings to improve bearing capacity.
Inlay welding of copper alloy and silver-plated at sliding surfaces of cone bearings to strengthen self-lubricating effects,and improve anti-snapping ability.
Technology
Seal and Lubrication: The bearing seal is adapting the high quality HNBR O-ring. The best seal compression and the radial seal structure can enhance the seal performance. The compensation system and the high quality bit grease can limit pressure differential, and greatly increase the lubricating reliability.
Motor hardfacing: Tungsten carbide particle hardfacing is applied liberally along the shirttail and extended up the leading edge of the bit leg for additional protection in high-speed, directional or abrasive applications
Six-point Gauge Stability: The design delivers near six-point contact with the borehole wall for unequalled bit stability that protects the cutting structure from damaging lateral blows
Application
These bits are suitable for drilling through tough and abrasive formations. To prevent the loss of bit gauge, wear-resistant tungsten carbide inserts are used in the outer rows. In order to ensure cutter durability and a long lifespan, the maximum number of hemispherical-shaped inserts are used in all rows.
Introduction
.
There are two sealing methods,sealed with O shape rubber rings or sealed with metal rings.The former adapts to conventional drill holes, the latter adapts to drill holes with high temperature and high speed.
Adopting friction balls to fasten cones, safe and reliable.
Buildup welding of wearing-resistant alloy at sliding surfaces of the head bearings to improve bearing capacity.
Inlay welding of copper alloy and silver-plated at sliding surfaces of cone bearings to strengthen self-lubricating effects,and improve anti-snapping ability.
Technology
Seal and Lubrication: The bearing seal is adapting the high quality HNBR O-ring. The best seal compression and the radial seal structure can enhance the seal performance. The compensation system and the high quality bit grease can limit pressure differential, and greatly increase the lubricating reliability.
Motor hardfacing: Tungsten carbide particle hardfacing is applied liberally along the shirttail and extended up the leading edge of the bit leg for additional protection in high-speed, directional or abrasive applications
Six-point Gauge Stability: The design delivers near six-point contact with the borehole wall for unequalled bit stability that protects the cutting structure from damaging lateral blows
Application
These bits are suitable for drilling through tough and abrasive formations. To prevent the loss of bit gauge, wear-resistant tungsten carbide inserts are used in the outer rows. In order to ensure cutter durability and a long lifespan, the maximum number of hemispherical-shaped inserts are used in all rows.
